How to properly install Racing harness components
Release time:
2022-09-15
In Racing harness components, the most important shoulder strap is said, according to the specification, the correct shoulder strap fixing angle should be 10 degrees below the rear horizontal line, and the left and right widths should not be greater than 20 degrees outside the center line;
Due to the incorrect installation of the Racing harness components, the seat belt will not function properly.
In Racing harness components, the most important shoulder strap is said, according to the specification, the correct shoulder strap fixing angle should be 10 degrees below the rear horizontal line, and the left and right widths should not be greater than 20 degrees outside the center line;
For this reason, many foreign factory teams will additionally weld a lateral roll cage in the correct position to fix the shoulder straps, so that when the vehicle hits the front, the instantaneous forward tilt G force is completely transmitted to the Racing harness components and the roll cage. superior;
Once the fixed position of the shoulder belt is too low, the force of the seat belt pulling forward will squeeze the racing seat back from the hole of the Racing harness components on the seat back, causing the seat back to break, and the consequences will be disastrous.
The installation of the racing harness components and the seat belt itself should be completed by professionals to prevent the seat belt from being worn by the seat and other components.
Racing harness components only provide enough strength along the length, so don't cross or twist the harness when using it.
Related News